Abstract
ITO (In2O3:Sn) films, synthesized under optimal conditions at 550°C for 0.75 hours, exhibited a transparency of over 90%, a surface resistance of 300 Ω/sq, and a resistivity (ρ) of 9.4 × 10⁻³ Ω·cm. High-temperature annealing was employed to reduce the resistance of these resistive coatings. This method facilitates the elimination of inhomogeneities that may be present in the coating prior to heat treatment. Initially, the coating expands due to the coalescence of vacancies; subsequently, at higher temperatures, it contracts as a result of the annihilation of vacancies and the formation of dislocation loops. Parallel experiments conducted on three samples at each temperature demonstrated the reproducibility of the results.
References
1. Shang-Chou Chang Low-pressure H2/N2 annealing on indium tin oxide film / Shang-Chou Chang // Microelectronics Journal 38 (2007) 1220-1225.
2.Effect of ITO spreading layer on performance of blue light-emitting diodes / MV Bogdanov, KA Bulashevich, OV Khokhlev, I.Yu. Evstratov, MS Ramm, S.Yu. Karpov // Рhys. stat. solid. - 2010. - No. 7-8. - P. 2127-2131.
3.Effects of substrate temperature and vacuum annealing on properties of ITO films prepared by ¬radiofrequency magnetron sputtering / N. Boonyopakorn, N. Sripogpun, C. Thanachayanont, S. Dangtip // Chin. Phys. Lett. - 2010. - Vol. 27, No. 10. - P. 103-108.