Keywords
How to Cite
Abstract
The article describes a new approach to designing technological processes for machining parts on metal-cutting machines under production conditions. This approach has been developed based on the preliminary prediction of machining accuracy. The process of selecting machining stage parameters is integrated with the modeling of cutting tools and technological fixture parameters. The sequence of technological process design begins with the initial operation and serves to consistently form the subsequent machining stages.
References
1. S. Bratan, E. Vladetskaya, A. Kharchenko, Improvement of quality of details at round grinding in the conditions of a floating workshop, MATEC Web Conf. 129, 01083 (2017)
2. V.I. Guzeev, Feed speed control to assure accuracy of complex profile surfaces
processing, Procedia Eng. 129, 495-499 (2015)
3. M. Mia, M.A. Khan, N.R. Dhar, Study of surface roughness and cutting forces using ANN, RSM, and ANOVA in turning of Ti-6Al-4V under cryogenic jets applied at flank MATEC Web of Conferences 224, 01057 (2018) https://doi.org/10.1051/matecconf/201822401057
4. A.M. Kozlov, A.A. Kozlov, Y.V. Vasilenko, Modeling a Cylindrical Surface
Machined by a Non-circular Face Tool, Procedia Eng. 150, 1081-1088 (2016)
5. J.S. Dureja, V.K. Gupta, V.S. Sharma, M. Dogra, M.S. Bhatti, A review of empirical modeling techniques to optimize processing parameters for hard turning applications, Proc. Inst. Mech. Eng. Pt. B J. Eng. Manuf. 230(3), 389-404 (2016)
6. G. Królczyk, M. Gajek, S. Legutko, Effect of the cutting parameters impact on tool life in duplex stainless steel turning process | [Utjecaj parametara obrade na vijek alata u procesu tokarenja dupleks čelika otpornog na koroziju], Teh. Vjesn. 20(4), 587-592 (2013)
7. S.N. Grigoriev, M.A. Volosova, V.L. Gurin, A.E. Seleznev, Wear of replaceable
indexable inserts made of mixed cutting ceramics CC650 as a function of force parameters of steel ShKh15 face milling, J. Fric. Wear 36(6), 521-527 (2015)
8. G.M. Krolczyk, P. Nieslony, S. Legutko, Determination of tool life and research wear during duplex stainless steel turning, Arch. Civ. Mech. Eng. 15(2), 347-354 (2015)
9. N.E. Karkalos, A.P. Markopoulos, Applicability of ANN models and Taguchi method for the determination of tool life in turning, MATEC Web Conf. 112, 06005 (2017)
10. Á.R. Machado, A.E. Diniz, Tool wear analysis in the processing of hardened steels, Int. J. Adv. Manuf. Technol. 92(9-12), 4095-4109 (2017)
11. P.P. Pereverzev, D.Yu. Pimenov, Optimization of control programs for numerically controlled machine tools by dynamic programming, Russ. Eng. Res. 35(2), 135-142 (2015)
12. P.P. Pereverzev, A.V. Akintseva, Optimal internal grinding cycles in multidimensional control-parameter space, Russ. Eng. Res. 36(11), 974-978 (2016)
13. A. Akintseva, P. Pereverzev, Complex optimization of parameters for controlling the cycle of internal grinding by the method of dynamic programming, MATEC Web Conf. 129, 01019 (2017)
14. A.T. Abbas, D.Yu. Pimenov, I.N. Erdakov, T. Mikolajczyk, E.A. El Danaf, M.A. Taha, Minimization of turning time for high-strength steel with a given surface roughness using the Edgeworth–Pareto optimization method, Int. J. Adv. Manuf. Technol. 93(5-8), 2375-2392 (2017)
15. V.I. Guzeev, Theory and methodology of calculating the productivity of contour machining of parts of various accuracy on turning and milling CNC machines, Abstract of a thesis of the Doctor of Engineering Sciences. Chelyabinsk: Publishing House of the SUSU, 33 (1994).
16. I.P. Deryabin, Methodology of the parametric design of multi-pass processing of round holes using end measuring tools, Abstract of a thesis of the Doctor of Engineering Sciences. Chelyabinsk: Publishing House of the SUSU, 36 (2009).
17. General machine-building standards of cutting time and modes for the standardization of works performed on universal and multipurpose CNC machines. Part 2. Standard cutting modes, Moscow: Economics, 472 (1990)
18. V.I. Guzeev, V.A. Batuev, I.V. Surkov, Cutting modes for turning and drilling-milling and boring CNC machines: Reference book / Edited by V.I. Guzeev, M: Mashinostroenie (Mechanical Engineering), 368 (2005)